WW1 1902 British UP saddle miniature
-
Cesar Dubon
- Posts: 16
- Joined: Wed Feb 17, 2010 1:14 pm
- Last Name: Dubon
This is my latest saddle creation in 1/6 scale. Thanks to my good friend John Morgan and all his UP knowledge this saddle would not have been possible. Thanks John.
That is incredible. The level of detail is amazing. I know virtually nothing about the fabrication of miniature tack so excuse my questions if they seem rather elementary.
Did you make the entire tree from scratch? The micro stitching is fantastic. Is it done my hand? Is there a whole industry out there for the fabrication of buckles, bits, other hardware?
Once again, an excellent job.
Shoe
Did you make the entire tree from scratch? The micro stitching is fantastic. Is it done my hand? Is there a whole industry out there for the fabrication of buckles, bits, other hardware?
Once again, an excellent job.
Shoe
-
Pat Holscher
- Society Member
- Posts: 7545
- Joined: Thu Nov 30, 2000 6:51 pm
- Last Name: Holscher
-
Society Member
Donation 3rd
Very nice!
-
Cesar Dubon
- Posts: 16
- Joined: Wed Feb 17, 2010 1:14 pm
- Last Name: Dubon
Thank you Everyone for the nice compliments.
That is incredible. The level of detail is amazing. I know virtually nothing about the fabrication of miniature tack so excuse my questions if they seem rather elementary.
Did you make the entire tree from scratch? The micro stitching is fantastic. Is it done my hand? Is there a whole industry out there for the fabrication of buckles, bits, other hardware?
Once again, an excellent job.
Shoe
Hi Shoe, Theres a huge industry out there for saddles smaller than 1/6 scale, the 1/9th scale. Lots of people, mostly women I think who make them for the breyer horse industry. My saddles are action figure size and besides myself, theres probably 2 individuals who make them but are very limited in what they offer. Theres a company by the name of Rio Rondo that caters to the 1/9th scale and offers buckles and all sorts of hardware. I decided to make my own line of photo etch buckles, shields, rivets, screws, etc. to cover all my cavalry saddles. I do make my own tree and all my saddle trees by hand. Thanks again.
Cesar
That is incredible. The level of detail is amazing. I know virtually nothing about the fabrication of miniature tack so excuse my questions if they seem rather elementary.
Did you make the entire tree from scratch? The micro stitching is fantastic. Is it done my hand? Is there a whole industry out there for the fabrication of buckles, bits, other hardware?
Once again, an excellent job.
Shoe
Hi Shoe, Theres a huge industry out there for saddles smaller than 1/6 scale, the 1/9th scale. Lots of people, mostly women I think who make them for the breyer horse industry. My saddles are action figure size and besides myself, theres probably 2 individuals who make them but are very limited in what they offer. Theres a company by the name of Rio Rondo that caters to the 1/9th scale and offers buckles and all sorts of hardware. I decided to make my own line of photo etch buckles, shields, rivets, screws, etc. to cover all my cavalry saddles. I do make my own tree and all my saddle trees by hand. Thanks again.
Cesar
-
Tony Barton
- Posts: 9
- Joined: Wed Nov 10, 2010 4:37 am
- Last Name: Barton
And here's one of the first of Cesar's saddles arrived at its destination.
A Trumpeter of the Royal Gloucestershire Hussars , Palestine 1918. I've made all the 1/6th scale kit , but it's not all attached here for clarity :~
The man represented is Stan Carter, who when in his sixties taught me to play the trumpet. I've always wanted to recreate him , and finally I got the opportunity.
And many thanks to John Morgan ( of this parish ) for his help with this and other saddles.
A Trumpeter of the Royal Gloucestershire Hussars , Palestine 1918. I've made all the 1/6th scale kit , but it's not all attached here for clarity :~
The man represented is Stan Carter, who when in his sixties taught me to play the trumpet. I've always wanted to recreate him , and finally I got the opportunity.
And many thanks to John Morgan ( of this parish ) for his help with this and other saddles.
-
Pat Holscher
- Society Member
- Posts: 7545
- Joined: Thu Nov 30, 2000 6:51 pm
- Last Name: Holscher
-
Society Member
Donation 3rd
Wow. The tack actually looks used. Pretty amazing.
-
Tim Lovelock
Hi Cesar,
Wow that's a really impressive model!! I am currently making a 'Rocking Horse' and I would like to dress it in the livery of the Australian Light Horse, which has brought me on a journey through the internet and this post. I am attempting to find a 'pattern' of the UP Saddle so as I can make a scale copy ?1/2, 1/3, size that would be suitable for my rocking horse. Are you able to point me in the right direction or do you have or sell drawings with measurements etc? Again your scale saddle is extremely impressive.
Kind Regards, Tim
Wow that's a really impressive model!! I am currently making a 'Rocking Horse' and I would like to dress it in the livery of the Australian Light Horse, which has brought me on a journey through the internet and this post. I am attempting to find a 'pattern' of the UP Saddle so as I can make a scale copy ?1/2, 1/3, size that would be suitable for my rocking horse. Are you able to point me in the right direction or do you have or sell drawings with measurements etc? Again your scale saddle is extremely impressive.
Kind Regards, Tim
-
lazyschnauzer
- Posts: 26
- Joined: Fri Jul 14, 2006 8:16 am
- Last Name: Morton
Superb detail! Really nice!
All the best,
Dan
All the best,
Dan
-
Cesar Dubon
- Posts: 16
- Joined: Wed Feb 17, 2010 1:14 pm
- Last Name: Dubon
I missed your post Tim. Thank you. PM you.
Thanks Dan.
Thanks Dan.